Supplier: Accsys
Fingerprints: Biometric fingerprint only
Summary: Fingerprint only systems identify the individual by comparing the read fingerprints against the stored record, scan or template. This does not require any supportive identification method such as a card, PIN code or tag. There will need to be an operational override for people without measurable fingerprints.
Supplier: Accsys
Fingerprints: Fingerprint/card combination
Summary: Identification of the entrant is via a physical device such as a card or tag, or a PIN number. The verification of the identity is a secondary process using a fingerprint. Benefits are absolute identity of the individual, and the fingerprint recognition may be deactivated for low security or high traffic areas.
Supplier: Accsys
Fingerprints: Remote biometric identification
Summary: The physical clock may be isolated from the server or central data/logical computer due to distance, geographic location or movement/portability. Communication may be established using a radio link to establish a network. On a simpler level, the clocking information may be sent as an SMS.
Supplier: Brand New Technologies
Fingerprints: Futronics FS82, FS80 andFS88 fingerprint and smartcard readers
Summary: FS 82 USB2.0 combines smartcard reader with fingerprint scanner into one device. With this unit you can do two-factor authentication. The registered fingerprint can be stored on the smartcard, which is read off the card onto the PC to match with a freshly captured fingerprint from the scanner at the time of authentication.
Supplier: Brand New Technologies
Fingerprints: Bio-KeyTrue User Identification AFIS
Summary: Bio-Key’s identification technology focuses on the ability to do true identification defined by a set of index points from a fingerprint that can be mapped into an Oracle database. The indexing algorithm lets your database go directly to the right set of records, eliminating the need to do a large number of comparisons.
Supplier: Brand New Technologies
Fingerprints: Lumidigm Venus Series
Summary: Lumidigm Venus Series biometric multispectral imaging sensors meet high performance fingerprinting challenges and eliminate failure to enroll (FTE) and failure to acquire (FTA). Venus series sensors protect against fake and spoof fingerprints by capturing detailed surface and deep tissue data.
Supplier: Brand New Technologies
Fingerprints: Datastrip DSVII – PA (Full page Passport edition)
Summary: DSVII – PA by Datastrip is a handheld device designed to provide identity verification and passport authentication by reading 2D barcodes, OCR-B and contact and contactless chips found on identification documents. The 500 dpi fingerprint sensor allows you to capture a high quality image of the fingerprint to positively match identity.
Supplier: DexSecurity Solutions
Fingerprints: DexID DI016
Summary: DexID DI016: access control and/or time and attendance for office environments. TCP/IP networked standalone controller. Optical fingerprint sensor. Proximity card and Mifare card interface optional.
Supplier: DexSecurity Solutions
Fingerprints: DexID DI017
Summary: DexID DI017: can be linked to multiple sites via networks using cellular technology or a LAN. Remote/centralised management and registration from one central system for different sites and buildings. Optical fingerprint sensor. Proximity card and Mifare card interface optional.
Supplier: DexSecurity Solutions
Fingerprints: DexID IDAnyware
Summary: DexID IDAnyware: perfect time and attendance solution for the corporate guarding industry. Remotely monitors personnel shifts and attendance integrated with a payroll package. Unit is linked via the GPRS network which allows 24-hour remote connection to the control room. Optical fingerprint sensor.
Supplier: DexSecurity Solutions
Hand geometry: DexID DI2F008
Summary: DexID DI2F008: the DexID Industrial 2-finger geometry system is an access control and time and attendance system for environments where normal fingerprint systems are problematic. Payroll integration. Suitable for mining and construction environment. Communication can be GSM or LAN. Proximity card and Mifare card interface optional.
Supplier: GSC Systems available from Distributor Elvey Security Technologies
Fingerprints: 380-10 MinitMan-FP
Summary: 380-10: the 380-10 MinitMan-FP is a cost effective timeclock suitable for time analysis and access control. The unit can store up to 1500 templates and 30000 transactions. Communication includes RS232, RS485 and TCP/IP. The unit is compatible with GSC's MP-Lite and TimeMaster PC time analysis and access software.
Supplier: GSC Systems available from Distributor Elvey Security Technologies
Fingerprints: 647-50 ProxNet-FP
Summary: 647-50: the 647-50 is a combined fingerprint and RFID reader with a durable, anti-static optical sensor. The unit is easily integrated with both the ProxNet and ProxnetPro to enhance the security of an access control installation. Fingerprint enrolment is accomplished using the supplied Template Management software.
Supplier: G2 Security
Fingerprints: V-Smart
Summary: A practical and affordable two-in-one reader, combines the high security of Bioscrypt’s proven finger scan matching technology with support for MIFARE, iCLASS and DESFire contactless smartcards. This provides the additional security of carrying your finger scan template with you, instead of storing it on the unit.
Supplier: G2 Security
Fingerprints: Sagem OMA 520
Summary: Bioscrypt’s V-Pass FX finger-scan reader provides flexible security options; finger only security in 1:N mode or dual-factor authentication in 1:1 mode with an external Wiegand reader. The unit can store up to 500 templates and has USB communications to Aux port.
Supplier: G2 Security
Fingerprints: V-Station
Summary: V-Station incorporates finger scan technology in a self-contained 3 form authentication terminal. It supports both standard and proprietary Wiegand, RS232, RS485 and Ethernet communications formats. The unit stores up to 3550 templates, has an optional integrated proximity or contactless smartcard reader or the 1 to 500 searching capability.
Supplier: BioDentity, available from Ideco Biometric Security Solutions
Fingerprints: EVIM
Summary: EVIM (electronic visitor identity management) portable fingerprint identification unit is the number one solution for visitor management. Visitor details and fingerprint are captured on the terminal and transmitted to EVIM. EVIM runs identity checks and stores visitor data, terminal prints gate pass with confirmed visitor name and site conditions.
Supplier: Sagem Morpho, distributed in SA exclusively by Ideco
Fingerprints: Sagem MA 500
Summary: Sagem’s MorphoAccess 500 is South Africa’s leading biometric fingerprint solution for access control and time and attendance, with identification in 1,8 seconds or less. All MA 500 models operate in identification mode and offer a storage capacity of two biometric templates per person from 3 000 to 50 000 individuals.
Supplier: Sagem Morpho, distributed in SA exclusively by Ideco
Fingerprints: Sagem OMA 520
Summary: Sagem’s Outdoor MorphoAccess 520 has the same features as the MA 500 but has been developed specifically for outdoor applications, with a ruggedised, weatherproof case, and is IP65 rated for access control and time and attendance. The OMA includes the Sagem DS algorithms for optimising image quality and fingerprint processing.
Supplier: Sagem Morpho, distributed in SA exclusively by Ideco
Fingerprints: Sagem MSO 300
Summary: Sagem’s MorphoSmart 300 is a high-end optical scanner for high-volume fingerprint enrolment in harsh environments. The MSO 300 offers a USB interface for PC applications and integrates two LEDs to guide and inform users about ongoing operations. A software development kit enables VARs to develop any applications carried out on PC platforms.
Supplier: Sagem Morpho, distributed in SA exclusively by Ideco
Fingerprints: Sagem MA 100
Summary: The MorphoAccess 100 fingerprint identification solution for physical access control operates exclusively in identification mode and offers two biometric templates per person for up to 500 individuals. The database can be downloaded via the network or via a USB interface. Compact, easy to install and compatible with legacy or new access control systems.
Supplier: Sagem Morpho, distributed in SA exclusively by Ideco
Fingerprints: Sagem MA120W
Summary: The MorphoAccess 120W is PI53 rated and ideal for a variety of access control applications, including those where damaged fingerprints are likely. It has an FBI-approved, large surface-area sensor. Allows for both identification and verification matching and features a built-in contactless card reader. Compatible with entire MorphoAccess range.
Supplier: Sagem Morpho, distributed in SA exclusively by Ideco
Management solution: Sagem MEMS
Summary: The Sagem-designed Morpho Enrolment and Management System (MEMS) is designed for basic access control functionality where statistical reporting is mainly required. Powerful Sagem enrolment algorithms ensure optimum enrolment for any environment. MEMS manages the complete range of MorphoAccess readers via TCP/IP. Duplicate search capability is also available. (Dongle specific)
Supplier: Ideco Group
Fingerprints: AFISwitch
Summary: AFISwitch offers fully automated checks, through the South African Police Services’ Criminal Record Centre. Checks can be performed on-site through electronic capture of fingerprints via Sagem technology and results are returned within 48 hours. Encrypted links ensure secure data transfer and privacy.
Supplier: Sagem Morpho, distributed in SA exclusively by Ideco
Fingerprints: Sagem MSO 1300
Summary: Sagem’s MorphoSmart 1300 is perfectly suited to desktop and laptop applications, with advanced embedded software for 1:1 verification and 1:N identification and intrinsic security features. The module captures, processes and matches fingerprints internally for increased security and verification or identification takes less than 1 second.
Supplier: Interoptic Networks
Fingerprints: Multi-Modal Biometrics
Iris: Multi-Modal Biometrics
Face: Multi-Modal Biometrics
Summary: Multi-Modal Biometrics System: users can enroll, match or verify with the three primary biometric characteristics: Iris, finger and face. The system can perform 1:N searching or 1:1 verification.
Supplier: Interoptic Networks
Face: face2face Access
Summary: face2face Access – this system knows the face of every magnetic, chip or proximity card owner. Before the doors are opened the station camera takes a picture of the person requiring access and the image is recognised within a fraction of a second. It can be rapidly installed in existing access control systems.
Supplier: Interoptic Networks
Fingerprints: CKB6000
Summary: CKB600: Multifunctional fingerprint access control device. Fingerprint optical scanner for user recognition.
Supplier: Impro Technologies
Fingerprints: ImproTouch for Sagem MA and OMA biometric readers
Summary: ImproTouch is a software package that makes a variety of fingerprint readers compatible with the IXP software range. ImproTouch is designed for user friendliness. The package is embedded within the ImproNet Software suite and is designed for easy access to enable the user to add, delete or edit bio-templates.
Supplier: Itatec
Fingerprints: CWbio
Summary: CWbio high end biometric template management system including enrolment, distribution of templates, reader diagnostics, scheduling, reporting and export to T&A systems. Full system and access logs simplify tracking system faults. Optimised for unstable networks. User friendly screens and hooks provided for popular access control systems. Product of choice for large corporate networks.
Supplier: Itatec
Fingerprints: BiWi
Summary: The BiWi Controller connects access control and clocking fingerprint readers over the cellphone (GSM) networks. The unit incorporates its own processor that monitors communications and consolidates the data from up to four local readers. The device makes possible fully portable operation of the range of Sagem fingerprint readers.
Supplier: Roman Protection Solutions
Fingerprints: Sagem MSO 300 reader with fake fingerprint protection.
Biometric management software: Locally developed and written.
Summary: Informer is a crime and identity theft product based on the Sagem reader to capture a person's fingerprint and to date and time stamp it with the simultaneous capturing of up to four photos upon entering a controlled area, or during the credit application or transactional phase.
Supplier: Regal Distributors SA
Fingerprints: LK 170
Summary: The LK170 is a widely used access control solution for the corporate and consumer markets. The unit can operate as standalone or in a network environment and has a capacity of 1500 fingerprints and 30 000 transactions. The advantage of the LK170 is ease of installation and set up. It comes with access control & management software.
Supplier: Regal Distributors SA
Fingerprints: LK 171
Summary: The LK171 is an access control and time and attendance biometric reader. The unit has a capacity of 2800 fingerprints and 50 000 transactions which can operate in a standalone or network environment. Typical applications include office, factory and defence use. The unit comes complete with time and attendance/access control software.
Supplier: Space Security Systems
Fingerprints: F7: ZK Biometric Identification Technology
Summary: The F7 biometric reader is a reliable unit with 1500 user capacity and 30 000 transaction capacity. This unit has the ability to operate as a standalone device or as a netwokable device with Sabres software (optional). This unit has a rating of
9-24 V d.c. and is equipped with a 3 A/12 V relay.
Supplier: Space Security Systems
Fingerprints: U160: ZK Biometric Identification Technology
Summary: U160 is a standalone fingerprint T&A system. The memory stick solves the problem of no PC in a local site. You just download records into the stick and take it to where there is a PC. U160 with Web management lets you navigate the records in it through TCP/IP at your convenience.
Supplier: Space Security Systems
Fingerprints: ZK Biometric Identification Technology
Hand geometry: F4
Summary: The F4 has a user capacity of 2800. It has a transaction record of 100 000 and is fitted wit a 3 A/12 V relay. The power consumption is 9-24 V d.c. with a UPS as an optional benefit. Communications is via RS232, RS485, TCP/IP. The device is equipped with an 80 character keyboard display.
Supplier: Softcon
Fingerprints: SAGEM MA120W
Summary: The MorphoAccess 120W is PI53 rated and ideal for a variety of access control applications, including those where damaged fingerprints are likely. It has an FBI-approved, large surface-area sensor. Allows for both identification and verification matching and features a built-in contactless card reader. Compatible with entire MorphoAccess range.
Supplier: Softcon
Fingerprints: SAGEM OMA520
Summary: Sagem’s Outdoor MorphoAccess 520 has the same features as the MA 500 but has been developed specifically for outdoor applications, with a ruggedised, weatherproof case, and is IP65 rated for access control and time and attendance. The OMA includes the Sagem DS algorithms for optimising image quality and fingerprint processing.
© Technews Publishing (Pty) Ltd. | All Rights Reserved.
printer friendly version