New UTP video products

February 2011 Products & Solutions, Surveillance

Further expanding its product range, Network Video Technologies (NVT), has released two new ultra-compact passive transmitter and receiver (transceiver) models, and a new compact 4-channel StubEQUTP Active Receiver Hub.

The new NV-215J-M Single Channel Passive Transceiver features an RJ45 UTP terminal, in addition to a 9-inch mini-coax pigtail with a Male BNC connection. The NV-217J-M Single Channel Passive Transceiver features an RJ45 UTP terminal and Male BNC to allow direct connection to a camera or DVR.

Compatible with today’s DVR and HDVR technology, both the NVT NV-215J-M and NV-217J-M are capable of delivering a fully equalised signal at distances up to 1 km when combined with any NVT DigitalEQTM Active Receiver. They are also compatible with all of NVT’s passive products for applications under 225 m.

Designed to bring NVT StubEQ benefits to installations with smaller camera numbers, the new NVT NV-442 StubEQ Active Receiver Hub transmits real-time camera video at distances up to 460 metres over Cat5 UTP cable, or 600 metres when combined with a NV-653T Active Transmitter.

The new hub’s StubEQ two-band technology continuously and automatically compensates for cable attenuation and ground loops, independent of video signal image – meaning no video equalisation adjustments are necessary. Housed in an ultra-compact 1U x 2-inch deep enclosure, the diminutive 4-channel hub supports RJ45 or screw-terminal connectivity, is UL and cUL listed, compliant with CE, RoHS and WEEE, and as with all NVT products, is covered by a limited lifetime warranty.

For more information contact Network Video Technologies, +44 (0)20 8977 6614, [email protected], www.nvt.com





Share this article:
Share via emailShare via LinkedInPrint this page



Further reading:

New fire blanket for lithium-ion battery fires
Fire & Safety Products & Solutions
SafeQuip launched its newly developed range of high-performance, multi-use lithium-ion battery fire blankets, specifically designed to address fires involving devices with lithium-ion batteries, providing a crucial tool for safety in environments where these batteries are in use.

Read more...
SafeQuip launches lithium-ion battery fire extinguishers
Fire & Safety Products & Solutions
[Sponsored] SafeQuip has launched the SANS 1910-2022 approved Lith-Ex fire extinguisher range, which carries NTA 8133:2021 (KIWA/POOO55865) test approval, which proves its lithium-ion battery fire extinguishing capability.

Read more...
Addressable smoke detector
Dahua Technology South Africa Products & Solutions Fire & Safety
Dahua’s addressable smoke detector connects to the addressable fire alarm control panel and analyses ambient smoke concentration through an intelligent algorithm to trigger alarms.

Read more...
Fire alarm control panel with printer
Dahua Technology South Africa Products & Solutions Fire & Safety
Dahua’s fire alarm control panel with a printer is designed to provide early warning fire detection, display fire information and offer flexibility in design and operation to meet the demands of various projects.

Read more...
Standalone smoke alarm
Dahua Technology South Africa Products & Solutions Fire & Safety
The Dahua DHI-HY-SA40A is a standalone smoke alarm that continuously monitors smoke concentration. This device works without a panel and is cost-effective and suitable for home use.

Read more...
Watermist suppression in mining
FS Systems Fire & Safety Mining (Industry) Products & Solutions
Watermist suppression systems are highly effective in suppressing flames and controlling heat spread, especially in confined spaces commonly found in mining environments, by generating fine droplets with an increased surface area, enabling rapid heat absorption and cooling during fire incidents.

Read more...
FS partners with Oculus
FS Systems Fire & Safety Products & Solutions
FS Systems announced a strategic partnership with Oculus Innovations to combine the company’s integrated security management solutions with Oculus Innovations’ expertise in designing state-of-the-art control room environments.

Read more...
Gas detection for mining
FS Systems Products & Solutions Fire & Safety Mining (Industry)
Flammable gas detection is critical in safeguarding mining operations, where combustible gases pose significant risks. Early detection of these gases helps prevent fires and explosions, which can lead to devastating consequences.

Read more...
ECP1000 extinguishing control panel
G2 Fire Products & Solutions Fire & Safety
The ECP1000 is a extinguishing panel built to EN54-2, EN54-4 and EN 12094–1 standards with multiple input and outputs to facilitate the protection of a single area and the connected devices.

Read more...
TeledataOne addressable panel
G2 Fire Products & Solutions Fire & Safety
The Onemini panel provides a one-loop option ideal for smaller installations, where the TeledataOne is expandable to nine loops; both are available from G2 Fire.

Read more...