In-building destination management system

Access & Identity Management Handbook 2015 Products & Solutions, Access Control & Identity Management

The Otis CompassPlus destination management system can now be integrated with the Lenel OnGuard security system, managing access and movement throughout a building. Otis, a manufacturer and maintainer of people-moving products, and Lenel, a brand name in advanced security systems and services, are both part of UTC Building & Industrial Systems, a unit of United Technologies Corp. (UTC)

CompassPlus delivers a variety of benefits, including improved lift efficiency and performance, reduced traffic within a building and shortened waiting times for lifts. Through technology developed by Otis, the CompassPlus destination management system allows a user to make a request for a specific floor on the entrance hall screen. The system then directs the user to a specific lift.

Faster elevators

CompassPlus features Otis’ patented SmartGrouping technology that organises travel by grouping passengers and stops. While passengers going to the same destination are assigned to the same elevator, SmartGrouping also assigns elevators to serve a group of floors or a zone, resulting in faster and better-organised service. Studies show that CompassPlus technology allows passengers get to their destination 26 to 42 seconds faster than conventional destination management systems in an average 15 floor building.

When fully integrated with the Lenel OnGuard platform, CompassPlus offers additional benefits to building owners and tenants alike. The OnGuard platform, which integrates a full suite of security management technologies tailored to each customer’s specific needs, determines a user’s destination point through access card identification. When users swipe their card, the access control system will direct users to the appropriate lift. This integration offers the end user and customers a single solution, according to Mike Hodgson, business development director for Chubb Fire & Security, which is an installer of Lenel systems and a part of UTC Building & Industrial Systems.

“Through the Lenel OnGuard integrated platform, we are able to give our customers the best possible opportunity to deploy a seamless integration solution within the facility,” said Hodgson. “In addition to managing user access, the system can notify an operator monitoring the system and generate reports to determine who requested access and when. Should a CCTV system be integrated, a short video can be accessed showing the event to the operator, thereby improving security.”

Destination assurance

The OnGuard platform provides enhanced intrusion-based features including local area alarm state, burglary verified alarm support and late night support. The platform also boasts innovative configuration settings such as destination assurance, whereby lift users are monitored and allowed to get to the correct destination within a given timeframe.

“We can direct visitors to the right elevator and to the correct floor that they are authorised to go to at a specific date and time,” said Hodgson. “If they do not make it to their destination within a specific time, the control room receives an alarm. This manages the flow of people to the building and ensures they get to their destination.”

Hodgson notes evacuation and emergency functionality as another major benefit of the integrated platform.

“The platform supports functionality like mustering, a raw core system in the case of an emergency that enables us to see people who may have entered the elevators,” said Hodgson. “We can see where they are in that particular zone and that feedback is forwarded to the fire marshals in case of an emergency. At the end of the day, a customer is able to deliver a highly efficient and comprehensive service with the integration of CompassPlus and the Lenel OnGuard platform.”

For more information contact Chubb, +27 (0)11 878 6029, [email protected], www.chubb.co.za





Share this article:
Share via emailShare via LinkedInPrint this page



Further reading:

New fire blanket for lithium-ion battery fires
Fire & Safety Products & Solutions
SafeQuip launched its newly developed range of high-performance, multi-use lithium-ion battery fire blankets, specifically designed to address fires involving devices with lithium-ion batteries, providing a crucial tool for safety in environments where these batteries are in use.

Read more...
SafeQuip launches lithium-ion battery fire extinguishers
Fire & Safety Products & Solutions
[Sponsored] SafeQuip has launched the SANS 1910-2022 approved Lith-Ex fire extinguisher range, which carries NTA 8133:2021 (KIWA/POOO55865) test approval, which proves its lithium-ion battery fire extinguishing capability.

Read more...
Addressable smoke detector
Dahua Technology South Africa Products & Solutions Fire & Safety
Dahua’s addressable smoke detector connects to the addressable fire alarm control panel and analyses ambient smoke concentration through an intelligent algorithm to trigger alarms.

Read more...
Fire alarm control panel with printer
Dahua Technology South Africa Products & Solutions Fire & Safety
Dahua’s fire alarm control panel with a printer is designed to provide early warning fire detection, display fire information and offer flexibility in design and operation to meet the demands of various projects.

Read more...
Standalone smoke alarm
Dahua Technology South Africa Products & Solutions Fire & Safety
The Dahua DHI-HY-SA40A is a standalone smoke alarm that continuously monitors smoke concentration. This device works without a panel and is cost-effective and suitable for home use.

Read more...
Watermist suppression in mining
FS Systems Fire & Safety Mining (Industry) Products & Solutions
Watermist suppression systems are highly effective in suppressing flames and controlling heat spread, especially in confined spaces commonly found in mining environments, by generating fine droplets with an increased surface area, enabling rapid heat absorption and cooling during fire incidents.

Read more...
FS partners with Oculus
FS Systems Fire & Safety Products & Solutions
FS Systems announced a strategic partnership with Oculus Innovations to combine the company’s integrated security management solutions with Oculus Innovations’ expertise in designing state-of-the-art control room environments.

Read more...
Gas detection for mining
FS Systems Products & Solutions Fire & Safety Mining (Industry)
Flammable gas detection is critical in safeguarding mining operations, where combustible gases pose significant risks. Early detection of these gases helps prevent fires and explosions, which can lead to devastating consequences.

Read more...
ECP1000 extinguishing control panel
G2 Fire Products & Solutions Fire & Safety
The ECP1000 is a extinguishing panel built to EN54-2, EN54-4 and EN 12094–1 standards with multiple input and outputs to facilitate the protection of a single area and the connected devices.

Read more...
TeledataOne addressable panel
G2 Fire Products & Solutions Fire & Safety
The Onemini panel provides a one-loop option ideal for smaller installations, where the TeledataOne is expandable to nine loops; both are available from G2 Fire.

Read more...