Fire-safety risks during load shedding

Issue 7 2022 News & Events, Fire & Safety


Michael van Niekerk.

The current load shedding implemented by electricity utility Eskom, as it faces a shortage of generation capacity due to a combination of maintenance and unplanned breakdowns, poses a heightened fire risk for homeowners and their families, warns ASP Fire CEO, Michael van Niekerk.

This follows a recent media report of an Eastern Cape family of seven losing everything when a fire engulfed their house after their electricity was restored following load shedding. The family of seven was forced to flee, seeking refuge in a rondavel.[1]

Van Niekerk urges all homeowners to put basic fire-risk mitigation measures in place to protect both their families and properties. The first thing homeowners need to do in the event of load shedding is to ensure all power sources are switched off. “This might sound like common sense, but it is very easy to forget to do so when the power goes off unexpectedly and your home is suddenly plunged into darkness.”

Another risk factor is using candles as a light source, which need to be extinguished immediately once the power supply is restored. Homeowners need to ensure that candles are positioned correctly so that, if they fall over, they do not pose a fire risk. Any candles must be placed in proper containers to prevent this from happening.

Van Niekerk advises homeowners to invest in a small fire extinguisher for the home and to ensure all residents not only know where it is placed so it can be accessed readily in darkness, but that everyone in the home knows how to operate it effectively in the event of a fire.

Fire-prevention legislation tends to focus on commercial and retail spaces rather than standalone residential dwellings, where there is no regulatory requirement to have fire extinguishers, hose reels or even automatic sprinklers installed, which is also prohibitive from a cost point of view. However, van Niekerk urges homeowners to have some fire prevention strategy in place, even if it just means having a fire extinguisher located at a central point such as a garage.

Homeowners are increasingly opting for backup gensets to supplement grid power in the event of load shedding, but these pose their own safety and risk issues.

“If the power goes out and you switch your genset on, only to find that it is out of fuel, for example, the last thing you want to do is attempt to refill that genset while it is running, or while the engine or exhaust is hot, as this poses a serious risk of causing a fire as the genset can cause the fuel to combust,” cautions van Niekerk.

Reference

[1] https://www.news24.com/news24/southafrica/news/family-loses-everything-in-house-fire-allegedly-sparked-by-load-shedding-20220916




Share this article:
Share via emailShare via LinkedInPrint this page



Further reading:

Highest increase in global cyberattacks in two years
Information Security News & Events
Check Point Global Research released new data on Q2 2024 cyber-attack trends, noting a 30% global increase in Q2 2024, with Africa experiencing the highest average weekly per organisation.

Read more...
Addressable smoke detector
Dahua Technology South Africa Products & Solutions Fire & Safety
Dahua’s addressable smoke detector connects to the addressable fire alarm control panel and analyses ambient smoke concentration through an intelligent algorithm to trigger alarms.

Read more...
Fire alarm control panel with printer
Dahua Technology South Africa Products & Solutions Fire & Safety
Dahua’s fire alarm control panel with a printer is designed to provide early warning fire detection, display fire information and offer flexibility in design and operation to meet the demands of various projects.

Read more...
Standalone smoke alarm
Dahua Technology South Africa Products & Solutions Fire & Safety
The Dahua DHI-HY-SA40A is a standalone smoke alarm that continuously monitors smoke concentration. This device works without a panel and is cost-effective and suitable for home use.

Read more...
Gas detection for mining
FS Systems Products & Solutions Fire & Safety Mining (Industry)
Flammable gas detection is critical in safeguarding mining operations, where combustible gases pose significant risks. Early detection of these gases helps prevent fires and explosions, which can lead to devastating consequences.

Read more...
ECP1000 extinguishing control panel
G2 Fire Products & Solutions Fire & Safety
The ECP1000 is a extinguishing panel built to EN54-2, EN54-4 and EN 12094–1 standards with multiple input and outputs to facilitate the protection of a single area and the connected devices.

Read more...
TeledataOne addressable panel
G2 Fire Products & Solutions Fire & Safety
The Onemini panel provides a one-loop option ideal for smaller installations, where the TeledataOne is expandable to nine loops; both are available from G2 Fire.

Read more...
Detect fires in the early stages
Securiton Products & Solutions Fire & Safety
The SecuriSmoke range from Securiton offers various levels of coverage and power to suit every budget and application. What all the models have in common is that they can detect smoke in very small quantities.

Read more...
SecuriHeat ADW linear heat detector
Securiton Products & Solutions Fire & Safety
The SecuriHeat ADW linear heat detector uses sealed tubes positioned over the detection area, and a remotely positioned control unit detects pressure changes in the tubes brought about by changing temperature.

Read more...
Fire detection goes wireless
Technoswitch Fire Detection & Suppression Products & Solutions Fire & Safety
Wireless technology facilitates quicker system installations with minimal disruption, reduced impact on the building’s structure, and less reliance on complex cabling. Technoswitch has introduced two wireless fire detection ranges to its portfolio.

Read more...