Proactive fire safety is essential

July 2018 Fire & Safety

The recent fire at the Macintosh Gallery in Scotland and the Grenfell Tower in London have made headlines for all the wrong reasons. The gallery was destroyed by fire in May 2014, which also spread to neighbouring buildings.

Andy Mizen.
Andy Mizen.

According to the Scottish Fire Brigade, the owners were advised to install sprinklers, but did not do so on cost grounds. The restoration project costed 35 million Pounds. The gallery also had a serious fire in June 2018, which caused millions of Pounds-worth of damage.

The Grenfell Tower incident happened on June 14th 2017, 71 souls died from a fire started because of faulty electrics. Fire spread rapidly, due to inadequate fire safety precautions and the proximity of combustible materials. According to the Grenfell Tower Enquiry, fire doors did not function correctly or were propped open, smoke control systems were inadequate, no sprinkler system was installed, gaps in the building were not sufficient to prevent the spread of fire, water pressure was insufficient for the height of the building, and means of fire warning did not work.

The London Metropolitan Police are preparing criminal corporate manslaughter charges for those responsible, with possible gaol terms.

In South Africa, major fires have included a paint factory in Killarney Gardens in December 2017, a packaging factory in Durban in December 2017, and an office building in Durban in December 2016, which damaged 5000 square metres and affected 25 businesses.

Proactive practices

Proactive fire safety practice, and indeed general health and safety compliance applies to any type of building and is essential for many reasons. Firstly, it reduces the risk of fire damage to buildings and contents (in 2013, a Makro warehouse burnt down in Johannesburg due to careless contractors).

Secondly, proactive fire safety measures can reduce the risk of loss of ability to function in terms of business continuity. Many businesses struggle to reopen after the disruption caused by fire. Thirdly, it reduces the risk of the fire brigade or Department of Labour closing the business for non-compliance. Fourthly, it can reduce insurance premiums by meeting insurance industry requirements set down in policy documents.

It can also reduce possible damage to client reputation, caused by negative publicity or possible injury, accident costs, or litigation from affected members of the public. And lastly, a positive side-effect is that stringent fire safety measures, such as trained security patrols, can reduce the risk of theft and robbery, due to an increased security presence.

Proactive fire safety must include knowledge and application of relevant legislation, such as local fire bylaws, the Occupational Health and Safety Act 1993 and relevant regulations, and South African National Standard codes (e.g. SANS 10400T fire safety, SANS 10400S disabled, and SANS 10287 sprinklers).

Organisation for fire safety is critical and must include management support, security team fire patrols, fire defence appointments, ensuring contractors operate safely, and documented records of safety measures. Additionally, proactive fire safety must include effective communications (signage, fire call points, visible schematics, etc.), structural precautions (sprinklers, smoke extraction, fire detectors, etc.), safe means of escape (lighting, fire doors, surfaces, and so on), safe external hazards (traffic and pedestrian safety), provision of hose reels/hydrants/extinguishers (correct usage, safety checks, etc.), electrical safety (certificate of compliance, thermographic surveys), chemical compliance (including safety data sheets, correct storage), machinery safety (certificate of compliance, tested), control of sources of ignition, fire separation to prevent spread of flame/smoke, control of combustibles (storage of flammables, housekeeping, etc.), safe evacuation procedure (fire drills, disabled evacuation), and emergency procedures that cover safety induction, dealing with accidents, and disaster recovery/business continuity planning.

In short, it is prudent to spend on proactive fire safety and not to be ‘penny wise, pound foolish’, as the English phrase goes. The cost of a fire can be extremely high, both financially and especially in terms of the potential for serious injury and loss of life.

Fire Safety Consulting is a fire and safety consulting firm that advises international clients on SA legislation, and UK and US codes. Andy Mizen has over 23 years’ international experience in fire and emergency procedures. He conducts fire safety audits to highlight non-compliance and trains both staff and security personnel in proactive fire safety.

For more information, contact Fire Safety Consulting, +27 78 8000 007, [email protected], www.firesafetyconsulting.co.za.





Share this article:
Share via emailShare via LinkedInPrint this page



Further reading:

New fire blanket for lithium-ion battery fires
Fire & Safety Products & Solutions
SafeQuip launched its newly developed range of high-performance, multi-use lithium-ion battery fire blankets, specifically designed to address fires involving devices with lithium-ion batteries, providing a crucial tool for safety in environments where these batteries are in use.

Read more...
SafeQuip launches lithium-ion battery fire extinguishers
Fire & Safety Products & Solutions
[Sponsored] SafeQuip has launched the SANS 1910-2022 approved Lith-Ex fire extinguisher range, which carries NTA 8133:2021 (KIWA/POOO55865) test approval, which proves its lithium-ion battery fire extinguishing capability.

Read more...
Partnership addresses fire hazard mitigation
Brigit Fire (a Division of Hudaco Trading) Elvey Security Technologies Fire & Safety Security Services & Risk Management
Brigit Fire has partnered with the Elvey Group. The collaboration will see Brigit Fire distributing both the advanced C-TEC addressable fire detection systems (CAST Technology) and GreenMist lithium extinguishers.

Read more...
Addressable smoke detector
Dahua Technology South Africa Products & Solutions Fire & Safety
Dahua’s addressable smoke detector connects to the addressable fire alarm control panel and analyses ambient smoke concentration through an intelligent algorithm to trigger alarms.

Read more...
Fire alarm control panel with printer
Dahua Technology South Africa Products & Solutions Fire & Safety
Dahua’s fire alarm control panel with a printer is designed to provide early warning fire detection, display fire information and offer flexibility in design and operation to meet the demands of various projects.

Read more...
Standalone smoke alarm
Dahua Technology South Africa Products & Solutions Fire & Safety
The Dahua DHI-HY-SA40A is a standalone smoke alarm that continuously monitors smoke concentration. This device works without a panel and is cost-effective and suitable for home use.

Read more...
Watermist suppression in mining
FS Systems Fire & Safety Mining (Industry) Products & Solutions
Watermist suppression systems are highly effective in suppressing flames and controlling heat spread, especially in confined spaces commonly found in mining environments, by generating fine droplets with an increased surface area, enabling rapid heat absorption and cooling during fire incidents.

Read more...
FS partners with Oculus
FS Systems Fire & Safety Products & Solutions
FS Systems announced a strategic partnership with Oculus Innovations to combine the company’s integrated security management solutions with Oculus Innovations’ expertise in designing state-of-the-art control room environments.

Read more...
Gas detection for mining
FS Systems Products & Solutions Fire & Safety Mining (Industry)
Flammable gas detection is critical in safeguarding mining operations, where combustible gases pose significant risks. Early detection of these gases helps prevent fires and explosions, which can lead to devastating consequences.

Read more...
ECP1000 extinguishing control panel
G2 Fire Products & Solutions Fire & Safety
The ECP1000 is a extinguishing panel built to EN54-2, EN54-4 and EN 12094–1 standards with multiple input and outputs to facilitate the protection of a single area and the connected devices.

Read more...