The new TEC601 from Technoswitch is an all-in-one fire and extinguishing rack-mountable control system designed to protect electronic equipment in 19-inch server room cabinets.
The TEC601 is capable of detecting a fire and releasing either the built-in, or externally mounted, Stat-X aerosol generators. Signals can be sent to other devices from the relay outputs for fire, fault and discharge conditions.
The Stat-X aerosol generator can easily be replaced after a discharge to minimise any downtime. It also allows for the wiring of an external detector or linear heat detection as a third detection zone.
An air-handling unit can be connected through the device to allow the air ventilation system to be cut off during a fire.
The Stat-X aerosol generator is a self-contained stainless steel extinguishing unit that, when activated, produces an ultra-fine aerosol extinguishing agent that is significantly more effective than other alternative extinguishing agents.
Highlights
• Fully self-contained fire detection and extinguishant unit.
• Rack mount unit (2U).
• Third zone available for external use.
• Air handling unit cut-off.
• Potential free relay outputs for fire, fault and discharge.
• Built-in battery backup with intelligent battery charging and testing.
• Built-in real-time clock with dedicated battery backup.
• Monitored extinguishant, sounder and zone outputs.
• Event memory log.
• Battery fail detection and warning.
• Tactile membrane keypad.
• USB port.
| Tel: | +27 11 794 9144 |
| Email: | [email protected] |
| www: | www.technoswitch.co.za |
| Articles: | More information and articles about Technoswitch Fire Detection & Suppression |
© Technews Publishing (Pty) Ltd. | All Rights Reserved.
printer friendly version