printer friendly version

Guard management solutions

UTrackIT has released a number of products aimed at the perimeter and guard monitoring markets, empowering the 24x7 tracking and monitoring of guards.

MobiGuard

This entry-level tracking module logs all movements of the guard. The MobiGuard device is robust and waterproof. It offers a straightforward, industry-standard tracking solution recording current position and route.

While moving, GPS data is recorded continuously and logged based on speed of travel, as well as having each stop and start logged. Frequent (within the minute) transmission of GPS data allow the route travelled to be followed over the Internet using a PC or mobile phone. Each MobiGuard device has a unique serial number chip to identify each guard. GPS (position) data is stored against this ID so past patrol logs can be accurately reviewed.

When there is no GPS possible (for example when the guard is in a building), the GPS can be complemented by placing RF 'Canaries' at strategic locations. The MobiGuard+ has an embedded reader that reads the canary identity and includes the time the guard passed this physical beacon in the normal patrol logs.

Patrol reports can be configured to provide a 1-page summary of beacon visits and the time spent at each during each patrol. Beacons can be virtual (GPS locations) or physical (canaries).

MobiAlert

MobiAlert is a black box that is pre-programmed with the site patrol schedule and includes a canary RF beacon. The beacon is there to confirm the guard has left the guardhouse, and the schedule sounds an alarm to prompt the guard to go on patrol (first a buzzer, and then a siren if the guard does not acknowledge). MobiAlert has been developed in response to client requests for a prompt to remind the guard to go on patrol, and to act as a dead-man’s switch that will sound the siren should the guard be unable to press the acknowledge button.

MobiAlert can be extended to receive motion signals from wireless proximity beams and this allows the guard to be notified of someone approaching when he is not watching – eg. vehicle approaching the gate. It has arm times that allow the siren to be on longer at night (in case he is on patrol), and short (or off entirely) during the day when there will be more traffic. If the use of a siren that could disturb the neighbours is undesirable, then the MobiAlert can switch on a strobe light to bring attention to an alert.

It can be further extended to include a modem that reports if the guard does not press the acknowledge button – a feature included in case he is indisposed (tied up) – and will notify the control room to take action.

For site and perimeter guarding, a visual grid representing patrol points visited by the guard simplifies the analysis of whether patrols have been performed correctly. Activities that require a person to be at a specified location on schedule can be complemented by an optional No-Show SMS to line managers and the control centre, thus freeing up resources as exceptions are highlighted timeously.

The Lithium-Ion rechargeable cell provides for 10 to 14 hours of continuous operation between charging. The unit is sealed at manufacture, a feature made possible by the new 'Qi' charging standard that offers highly efficient, wireless recharging within approximately four hours.

MobiGuard is standard with GPS for satellite positioning and GPRS for data transmission to your UTrackIT asset mapping and route review account.

MobiMinder

The portable MobiMinder has both a canary RF beacon and a panic button. The canaries may be programmed to ‘sing’ in several instances:

• If the guard presses the button (panic situation).

• If two or more guards are near each other (the MobiMinder will report on both MobiGuards’ IDs).

The MobiMinder works hand-in-hand with MobiGuard+ using the communication of the MobiGuard to receive instructions and send reports, proximity, and button-presses. MobiMinder cannot operate without a MobiGuard.

MobiAlert can be programmed depending on customer requirements. These settings include:

• Pre-programmable intervals for guard check-ins.

• Patrol start times (alerts).

• The ability to trigger / switch on a sound bomb to the guard should he have ignored, or be unable, to check in on schedule.

• Be used as an anti-snooze device.

• Interface to wireless infrared motion sensors and set to sing when anyone approaches a location.

• Can also be fitted with a modem that reports every event, providing a complete record in the control centre.

For more information, contact Robert Austin, UTrackIT, 0860 887 225, [email protected], www.utrackit.com

Share this article:

Further reading: