PTZ thermal and optical combination cameras

1 January 2016 Products & Solutions, Surveillance, Perimeter Security, Alarms & Intruder Detection

Sunell Security has released two new PTZ cameras that combine thermal technology with high definition optical imaging. Both models are able to detect the temperature of objects under observation and make use of uncooled IRFPA microbolometer technology.

The ONVIF compatible SN-TPT4230LM/F is an IP66-rated IP surveillance system offering a thermal resolution of D1 at 30 frames per second (fps), while the optical camera offers 1080p resolution at 30 fps, as well as 22X optical zoom capabilities.

Thermal lenses are available in 25 mm, 35 mm and 50 mm options. This will enable users to detect a human at distances of 500, 800 or 1100 m.

The thermal camera supports H.264 or MJPEG compression as well as DVE image enhancing and 3D noise reduction for clear and precise images. Depending on user requirements, the system can stream images in resolutions of D1 or CIF.

To enhance the security capacity of the camera, Sunell has included the ability to raise an alarm depending on the temperature of objects, motion detection, or if the network is disconnected for some reason. Audio capabilities are also included, as is edge recording via the Micro SD/SDHC slot, which supports a maximum of 32 GBof video.

The big brother of the SN-TPT4230LM/F is the uncooled SN-TPT4230HF/M which offers lens options of 75 mm, 100 m. This means the thermal camera is able to detect a person at 1500 or 2000 m, depending on the lens chosen.

Its thermal camera also provides users with temperature detection capabilities and a detector array resolution of 420x315. It will deliver D1 resolution video consistently at 30 fps.

The visual camera is Sunell’s Super WDR 1080p camera using a Sony CMOS vari-focus lens offering true WDR at 120 dB. It supports H.264 or MJPEG compression as well as 3D noise reduction. The system can stream images at 1080p, 720p or D1 depending on user requirements, with 1080p video streamed at 30 fps.

As with the previous model, Sunell has included the ability to raise an alarm depending on the temperature of objects, motion detection, or the network being disconnected. Audio capabilities are standard, and edge recording up to 32 GB is supported via the Micro SD/SDHC slot.

For more information contact Sunell SA, [email protected], www.sunellsecurity.com





Share this article:
Share via emailShare via LinkedInPrint this page



Further reading:

New fire blanket for lithium-ion battery fires
Fire & Safety Products & Solutions
SafeQuip launched its newly developed range of high-performance, multi-use lithium-ion battery fire blankets, specifically designed to address fires involving devices with lithium-ion batteries, providing a crucial tool for safety in environments where these batteries are in use.

Read more...
SafeQuip launches lithium-ion battery fire extinguishers
Fire & Safety Products & Solutions
[Sponsored] SafeQuip has launched the SANS 1910-2022 approved Lith-Ex fire extinguisher range, which carries NTA 8133:2021 (KIWA/POOO55865) test approval, which proves its lithium-ion battery fire extinguishing capability.

Read more...
Addressable smoke detector
Dahua Technology South Africa Products & Solutions Fire & Safety
Dahua’s addressable smoke detector connects to the addressable fire alarm control panel and analyses ambient smoke concentration through an intelligent algorithm to trigger alarms.

Read more...
Fire alarm control panel with printer
Dahua Technology South Africa Products & Solutions Fire & Safety
Dahua’s fire alarm control panel with a printer is designed to provide early warning fire detection, display fire information and offer flexibility in design and operation to meet the demands of various projects.

Read more...
Standalone smoke alarm
Dahua Technology South Africa Products & Solutions Fire & Safety
The Dahua DHI-HY-SA40A is a standalone smoke alarm that continuously monitors smoke concentration. This device works without a panel and is cost-effective and suitable for home use.

Read more...
Watermist suppression in mining
FS Systems Fire & Safety Mining (Industry) Products & Solutions
Watermist suppression systems are highly effective in suppressing flames and controlling heat spread, especially in confined spaces commonly found in mining environments, by generating fine droplets with an increased surface area, enabling rapid heat absorption and cooling during fire incidents.

Read more...
FS partners with Oculus
FS Systems Fire & Safety Products & Solutions
FS Systems announced a strategic partnership with Oculus Innovations to combine the company’s integrated security management solutions with Oculus Innovations’ expertise in designing state-of-the-art control room environments.

Read more...
Gas detection for mining
FS Systems Products & Solutions Fire & Safety Mining (Industry)
Flammable gas detection is critical in safeguarding mining operations, where combustible gases pose significant risks. Early detection of these gases helps prevent fires and explosions, which can lead to devastating consequences.

Read more...
ECP1000 extinguishing control panel
G2 Fire Products & Solutions Fire & Safety
The ECP1000 is a extinguishing panel built to EN54-2, EN54-4 and EN 12094–1 standards with multiple input and outputs to facilitate the protection of a single area and the connected devices.

Read more...
TeledataOne addressable panel
G2 Fire Products & Solutions Fire & Safety
The Onemini panel provides a one-loop option ideal for smaller installations, where the TeledataOne is expandable to nine loops; both are available from G2 Fire.

Read more...